Products
Grade : 4.6, 5.6,8.8, 10.9, Stainless Steel A2-70 (SS304), A4-70 (SS316)
Size Range M4-M64
Finishing PHOSPHATED BLACK, ZINC PLATED, HOT DIP GALVANIZED
Feature
We manufacture Hex Bolts and Full Thread Screws as per ISO Grades 4.6, 5.6, 6.8, 8.8, 10.9 & 12.9. Our Manufacturing Capacity for Headed Products is from M8 X 50 to M100 X 1200 & for Non Headed Products from M8 to M100 & Length up to 3 Meters. Bolts can be provided in various surface finishes like Zinc Trivalent Plating, Hot Dip Galvanized, PTFE and Zinc Flake coatings
Materials
MILD STEEL, ALLOY STEEL, STAINLESS STEEL
DIN 931, DIN 933
ISO 4014, ISO 4017
IS IS1363-1, IS1363-2
Grade : 8.8S, 10.9S, A325M
Size Range M16-M42
Finishing PHOSPHATED BLACK, ZINC PLATED, HOT DIP GALVANIZED
Feature
We manufacture and supply High Strength Structural Bolt Assembly (HSFG/HSS Bolt Assembly) consisting of a Heavy Hex Bolt, Heavy Hex Nut & Hardened Washer. Structural Bolts shall conform to IS, ISO, EN or ASTM Standard or as per Customer Requirements. Direct Tension Load Indicating (DTI) washers are also supplied with the Structural Bolts as per customer requirements. All bolts can be supplied in various surface finishes as Black Phosphated, Zinc Plated, Hot Dip Galvanised or Zinc Flake Coating.
Materials
ALLOY STEEL
IOS EN 14399
IS IS: 3757
ASTM A325
Grade : Shear connectors with Ceramic ferrules to suit the shear connectors are supplied. Depending upon the application, Bare Metal or Through Deck Ceramic Ferrules are supplied.
Size Range Shank diameter 13, 16, 19, 22 and 25 mm are most commonly used worldwide, with varying lengths.
Feature
Mechanical properties & other requirements of studs shall confirm to the requirements of Type-B studs specified in AWS Dl.1/D1.lM or equivalent. Studs for welding with ceramic ferrules are provided with an aluminum tip as required by the welding process to facilitate the ignition of the arc, to stabilize the arc and to deoxidize the welding pool
Materials
Shear Stud Connector Shall be manufactured from cold drawn Wire Rods confirming the requirements of ASTM A 29 of grade designation SAE 1010 through SAE 1020 or equivalent, inclusive either semi-killed or killed (aluminium or silicon deoxidation).
IOS ISO 13918
Grade : Mild Steel 4.6, HT 8.8, HT 10.9
Size Range M12-M100
Finishing NATURAL, ZINC PLATED, HOT DIP GALVANIZED
Feature
FOUNDATION BOLTS / ANCHOR BOLTS AS PER CUSTOMER SPECIFICATIONS AND DRAWINGS
Materials
MILD STEEL, ALLOY STEEL
DIN 931, DIN 933
ISO 4014, ISO 4017
IS IS1363-1, IS1363-2
Grade : Mild Steel 4.6, HT 8.8, HT 10.9, Stainless Steel B8, ASTM A193 B7
Size Range M6 – M64
Finishing PHOSPHATED BLACK, ZINC PLATED, HOT DIP GALVANIZED, GEOMET, PTFE COATING
Feature
We manufacture Fully Threaded Stud with Nut and Washer Assemblies Conforming to ASTM A 193/ASTM A 194 Standard and various other standards. Studs can be manufactured as per customer specifications. All studs can be supplied in various surface finishes Phosphated, Xylan PTFE, Hot Dip Galvanized and Zinc Plated.
Materials
MILD STEEL, ALLOY STEEL, STAINLESS STEEL
DIN 976A
ASTM A193 B7
Grade : 4.6 ,8.8, 10.9, Stainless Steel
Finishing NATURAL, ZINC PLATED, HOT DIP GALVANIZED
Feature
U-BOLTS FOR PIPE SUPPORTS
Materials
MILD STEEL, ALLOY STEEL, STAINLESS STEEL
DIN 898, DIN 3570
Grade : Mild Steel, Stainless Steel
Size Range M6 – M20
Finishing ZINC PLATED, HOT DIP GALVANIZED
Feature
Mechanical and Chemical Anchor Bolts used in Metal Structures, Metal Rails and other strucutural and glaziing applications
Materials
MILD STEEL, ALLOY STEEL, STAINLESS STEEL
Grade : Mild Steel 4.6, HT 8.8, HT 10.9, Stainless Steel
Size Range M6-M16
Finishing PHOSPHATED BLACK, ZINC PLATED, HOT DIP GALVANIZED
Feature
Socket Head Cap Screws (known as Allen Bolts)
Materials
ALLOY STEEL, STAINLESS STEEL
DIN 912
IOS ISO 4762
IS IS:2269
Grade : 8.8, 12.9, A2-70 (SS304), A4-70 (SS316)
Size Range M4-M42
Finishing PHOSPHATED BLACK, ZINC PLATED
Feature
Socket Head Cap Screws (known as Allen Bolts)
Materials
ALLOY STEEL, STAINLESS STEEL
DIN 912
IOS ISO 4762
IS IS:2269
Grade : 8.8, 12.9, A2-70 (SS304), A4-70 (SS316)
Size Range M4-M20
Finishing PHOSPHATED BLACK, ZINC PLATED
Feature
Materials
ALLOY STEEL, STAINLESS STEEL
Grade : 8.8, 12.9, A2-70 (SS304), A4-70 (SS316)
Size Range M4-M20
Finishing PHOSPHATED BLACK, ZINC PLATED
Feature
Materials
ALLOY STEEL, STAINLESS STEEL
IOS IS0 10642
IS IS 6761
Grade : 4.6,8.8, Stainless Steel A2-70 (SS304)
Size Range M6 – M12
Finishing NATURAL, ZINC PLATED, HOT DIP GALVANIZED
Feature
Materials
MILD STEEL, ALLOY STEEL, STAINLESS STEEL
DIN 603
IS IS 2609
Clients Testimonials
Amazing Feedback Say About Services
Happy Client
“GRKG Overseas has been our go-to supplier for years. Their commitment to quality and professionalism is unmatched. We've always received our orders on time, and their competitive pricing has helped us maintain our market edge. Highly recommend their services! “
Happy Client
“As a business owner in the UAE, partnering with GRKG Overseas has been a game-changer. Their products are top-notch, and their customer service is exceptional. The reliability and timely delivery make them stand out in the industry. They truly are a reputable and trusted partner. “
Happy Client
“Working with GRKG Overseas has been a seamless experience. Their dedication to service quality and competitive pricing has allowed us to expand our offerings in the UK market. We appreciate their professionalism and the consistency in delivering high-quality products. “
Happy Client
“GRKG Overseas has proven to be an invaluable partner for our operations in Australia. Their professionalism, timely deliveries, and superior product quality have significantly boosted our business. We are thrilled with the level of service and reliability they provide. “
Strengthening Our Journey, Together
Our Supporting Partners
